Exiting The System Setup Menu - Jensen VM9022 Manual De Instrucciones

VM9022
Setting Options Function
Camera Normal
Mirror Reverse the camera image as if
looking through a rear-view mirror.
TFT Set Auto The TFT panel automatically
Open retracts when turned off and
resumes its previous angle when
the unit is turned back on.
Manual The TFT panel maintains its angle
adjustment setting when the radio is
turned on/off.
Off The TFT panel automatically
retracts when turned off and DOES
NOT resume its previous angle
when the unit is turned back on.
If the monitor is in display mode, the monitor automatically
switches to CAMERA mode upon reverse driving. When the
reverse driving stops, the monitor return to its original input
mode.
P.VOL Sub-menu Features
Setting Options Function
Source DISC Choose a source for which you
would like to increase the relative
RADIO
volume (LEVEL).
SD
Use the +/- buttons to increase or
decrease the relative volume for the
SAT
specified source up to 6 decibels.
AUX 1
USB
BT
AUX 2
iPod
NAV
TS Cal (Screen Calibration)
To access the "Screen Calibration" function from the SETUP
menu, select the "TS CAL" option.
After entering calibration mode, a crosshair
corner quadrant of the screen. To begin calibration, press and
hold the crosshair for one second until it moves to the next
quadrant. Continue for each quadrant until the calibration is
completed.
To exit without performing calibration, touch the BACK
button.

Exiting the System Setup Menu

To exit setup mode and resume normal playback, press the
SETUP button (31) on the remote control or touch the BACK
button on the screen.
appears in a
19