Beurer BC 30 Manual De Instrucciones página 19

Tensiómetro
Ocultar thumbs Ver también para BC 30:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34
• Following the display check, during which all numbers light
up, the cuff inflates automatically. Whilst the cuff is pumping
up, the device already calculates measurements for estimat-
ing the necessary pump pressure. If this pressure is insuffi-
cient, the device automatically pumps more pressure.
• Then the pressure in the cuff is slowly released and as soon
as a pulse is detected, the pulse symbol
Measuring can be cancelled at any time by pressing the
on/off button
and the device switches to standby
mode.
• Systolic pressure, diastolic pressure and pulse readings are
displayed.
• The measurement is automatically stored.
• The symbol
appears if the measurement could not be
performed properly. Observe the chapter "Error messages/
troubleshooting" in these instructions for use and repeat the
measurement.
• The device switches off automatically after 1 minute.
Wait at least 5 minutes before taking another measurement!
Evaluating results
Cardiac arrhythmia:
This instrument can identify possible cardiac arrhythmia dis-
orders during measurement and if necessary indicates the
measurement with the flashing icon
This may be an indicator for arrhythmia. Arrhythmia is a condi-
tion where the heart rhythm is abnormal as a result of defects
in the bioelectrical system controlling the heart beat. The
symptoms (omitted or premature heart beats, slow or exces-
flashes.
.
19
sively fast heart rate) may be caused, among other things,
by heart disease, age, physical predisposition, excessive use
of stimulants, stress or lack of sleep. Arrhythmia can only be
ascertained through examination by your doctor.
Repeat the measurement if the flashing icon
after the measurement. Please note that you should rest for
5 minutes between measurements and not talk or move dur-
ing the measurement. If the icon
contact your doctor. Any self-diagnosis and treatment based
on the test results may be dangerous. It is vital to follow your
doctor's instructions.
Classification of measurements:
The measurements can be classified and evaluated in accord-
ance with the following table.
However, these standard values serve only as a general guide-
line, as the individual blood pressure varies in different people
and different age groups etc.
It is important to consult your doctor regularly for advice. Your
doctor will tell you your individual values for normal blood pres-
sure as well as the value above which your blood pressure is
classified as dangerous.
The classification on the display and the scale on the unit show
which category the recorded blood pressure values fall into. If
the values of systole and diastole fall into two different catego-
ries (e.g. systole in the 'High normal' category and diastole in
the 'Normal' category), the graphical classification on the de-
vice always shows the higher category; for the example given
this would be 'High normal'.
is displayed
appears often, please

Publicidad

Tabla de contenido
loading

Tabla de contenido