How To Operate The Receiver; How To Adjust The Squelch - Beyerdynamic Opus 600 Manual Del Usuario

Opus 600 – NE 600 Diversity Receiver
• Thread the power cable through the cable grip
as shown on the illustration. The cable grip
prevents the connector from being pulled off
by accident.
2.5

How to operate the receiver

• Switch on the receiver
illuminate.
• As soon as you switch on the transmitter, the
RF indicator will illuminate. When you speak
into the microphone, the AF indicator
illuminate according to the strength of the
sound level. If the LED does not illuminate or
there is no sound, the system should be
rechecked.
• The microphone output level has to be
adjusted at the amplifier or mixer.
2.6

How to adjust the squelch

• Due to the Pilotone and NoiseLock features
static noise should not occur.
• If the RF indicator
transmitter is switched on, noise will occur. The
more LEDs illuminate, the stronger the inter-
ference.
• In this case the interference can be suppressed
with the squelch control
wise to the right.
• Please note, adjusting the squelch can affect
the sensitivity of the receiver and the distance
between transmitter and receiver antenna may
need to be reduced.
• If the interferences cannot be suppressed
with the squelch control, you should select a
different frequency (refer also to chapter
2.7 Channel / frequency selection).
. The red LED will
will
illuminates before the
by rotating it clock-
NE 600 S / D
NE 600 S / D
NE 600 S
NE 600 D
49
Cable grip