System Setup Menu; Tv System; Channel Setup - Televes RSD - 7118 Instrucciones De Uso

User Manual
9.- System Setup

9.1.- TV system

On this menu you can select the TV standard and format type for screen vie-
wing.
Display Mode
This option enables you to select the TV norm or standard among the
following modes: Automatic, PAL, PAL-M, PAL-N and NTSC.
Select the option using the V+/V- buttons.
Aspect Mode
The screen format presents an aspect ratio that may be: "Auto",
"4:3PS", "4:3LB" or "16:9".
If you select 4:3, all the programs will be viewed with this aspect ratio.
If you select 16:9, the screen format will be automatically adjusted
according to the aspect ratio of the program to be viewed.
Video Output
This option enables you to select the Video Output mode, RGB or
CVBS, available on TV scart.
RF System
Select the TV standard type from the mode PAL BG, PAL I, PAL DK and
NTSC.
RF Channel
Select the RF Output Channel that the receiver will have with the keys
V+/V-. The possible value are C21 ... C69).
At the factory default configuration, the RF output CH is Ch38 (PAL G).

9.2.- Channel Setup

This menu can configure the initial channel in the event of a power outage.
Startup Channel
Press the OK button on the option "Startup Channel".
Enable the option (Boot on Channel) using the V+/V- buttons.
Select the TV or Radio mode and then the startup channel.
To leave the menu, press the EXIT button.
Note: If no channel has been selected with this option, the receiver will
start on the last program selected.
51
"RSD - 7118"