Televes RSD - 7118 Instrucciones De Uso página 56

User Manual
Positioner
Select one of the options: "None", "DiSEqC1.2" or USALS for the
switch, using the V+/V- buttons.
By pressing the OK button on each of the two options of the Polarizer,
we access a sub-menu where we can configure each of the options.
See Sections. "Conf. DiSEqC 1.2" and "USALS - DiSEqC 1.3".
This option (Positioner) is not available when the "DiSEqC" and "Tone
Burst" options are enabled.
Toneburst
It enables or disables the "Tone Burst" function using the V+/V- buttons.
If this function is enabled, the "Positioner" option will not be available,
and the DiSEqC option will be available on "A" and "B" inputs.
LNB Power
Select the option "Turn on" or "Turn off" for the LNB power feed.
Unicable Setting:
Select the frequency for each IF channel.
56
"RSD - 7118"