Oase BioPress UVC 1000 Instrucciones De Uso página 5

- English -
Start-up
Attention! Dangerous electrical voltage.
Possible consequences: Death or serious injuries.
Protective measures:
• Electrical units and installations with a rated voltage of U > 12 V AC or U >30 V DC located in the water: Isolate the
units and installations (switch off and disconnect from the power supply) before reaching into the water.
• Isolate the unit before starting any work.
• Secure the unit to prevent unintentional switching on.
!
Attention! Never operate the unit with a water pressure of more than 2.9 psi (0.2 bar)
Important:
● Switch the pump on first, then the UVC clarifying unit.
● Do not operate the unit without water flowing through.
●
The unit switches on automatically when power
connection is established.
1. Switching on: Connect power plug to the socket.
○ The Light Indicator is lit.
Note:
○ After a new installation, the unit will reach its full
biological cleaning effect after a few weeks.
○ The full effect on bacteria is only reached as at a
water temperature of 50 °F (+ 10 °C).
○ In the event of overheating, the installed
temperature monitor switches the UVC lamp off
automatically, the lamp automatically switches on
again once cooled down.
○ Check all connections for leaks.
2. Switching off: Disconnect the power plug.
Questions, problems, missing parts?
Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email
us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com
BioPress 1600 / 2400
1.
BioPress 1000
1.
5