Oase BioPress UVC 1000 Instrucciones De Uso página 9

- English -
Cleaning the quartz glass / Replacing the UVC lamp (cont.)
Replacing the UVC lamp
Important:
●
Only use lamps the identification and capacity data of
which correspond to the information on the type
plate.
● For an optimum filter performance, we recommend
to replace the UVC lamp every year after approx.
8,000 operating hours.
5. Pull out and replace the UVC lamp.
Assembly of the UVC clarifying unit
6. Insert the quartz glass including the O ring against
the stop in the unit head.
○ Press the O ring into the gap between unit head
and quartz glass.
7. Tighten the clamping screw clockwise up to the stop.
8. Tighten the self-tapping screw.
9. Check the O-Ring at the unit head for damage and
replace, if necessary.
○ Carefully push the unit head into the housing while
applying slight pressure. Ensure that the tenons
at the housing engage in the grooves of the
bayonet closure.
○ Turn the unit head clockwise against the stop while
applying slight pressure.
○ Refit the cover for the UVC pre-clarifying unit.
Questions, problems, missing parts?
Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email
us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com
9