off by means of the "Off/Pulse" switch and
unplug it from the power supply.
10. Wait until the mixing blade has stopped
moving.
using the grating anD slicing Discs
can easily be removed with a little butter.
Ingredients that can melt (such as chocolate or hard cheese) should be processed for only a short
time, to prevent them from becoming too warm.
Do not operate the appliance longer than one minute at a time. After one minute, let the appliance
cool briefly before continuing.
1. Read the information in the chapter on
"Using the chopping blade".
2. Carefully attach the desired disc on the disc
holder. Insert the disc from above into the
opening in the disc holder. Make sure that
the flat side of the disc matches the flat
side of the opening. Only then can the disc
lock into place. Do not continue until after
checking to make sure that the disc is firmly
in place.
caution: the blades of the discs are
very sharp: Danger of injury.
3. Now place the disc holder onto the shaft in
the mixing bowl.
4. Caution: both the shaft in the appliance and
the inside of the utensils have a flattened
side. All utensils can be inserted only if both
flattened sides are aligned.
5. Place the lid on the appliance.
6. Switch on the appliance by setting the
switch to „On". The mixing blade starts to
turn. You can also press the "Off/Pulse"
button, in which case the appliance will
operate in short, powerful bursts. Use the
Pulse switch only in intervals of five to ten
seconds.
7. Add the ingredients through the filling
shaft. If the ingredients are too large, they
must first be halved or quartered or cut to
the size of the filling shaft.
11. Remove the lid.
12. Carefully remove the mixing blade from the
bowl.
13. Empty the ingredients from the mixing bowl.
For slicing and grating
vegetables, fruits, bread for bread crumbs, cheese,
Parmesan, herbs, chocolate
Note that the plastic can become discolored from
some foods, such as carrots. Such discolorations
8. Always use the tamper to add more ingre-
dients. Never add or push ingredients with
your hand!
9. Never insert hard objects such as bones or
cooking spoons into the filling shaft. Danger
of injury.
10. When you have finished processing the
ingredients, switch the appliance off by
means of the "Off/Pulse" switch and unplug
the appliance from the power supply.
11. Wait until the disc holder has stopped
moving.
12. Remove the lid.
13. Carefully remove the disc holder from the
bowl. This is easier to do if you lift the bowl
from the base and replace it offset some-
what from the original position. This pushes
the disc holder up and you can remove it
easily and safely.
14. the blades of the discs are very sharp. Danger
of injury.
15. Due to the design of the appliance, it is pos-
sible that small pieces of food can remain
on the disc holder.
16. Empty the ingredients from the mixing bowl.
17. To remove the disc from the disc holder,
turn the disc holder around and press the
disc downward out of the holder.
Please be very careful, since the
cutting edges are sharp and there is a
risk of injury.
21