Plug Configurations
Units are supplied from the factory with an electrical cord and
plug installed. Plugs are supplied according to the application.
WARNING
ELECTRIC SHOCk HAzARD: Plug unit into a properly
grounded electrical receptacle of the correct voltage, size,
and plug configuration. If plug and receptacle do not
match, contact a qualified electrician to determine and
install the proper voltage and size electrical receptacle.
NOTE: The specification label is located on the back of the unit
for free-standing units and on the inside of the left panel
for built-in units. See label for serial number and
verification of unit electrical information.
Electrical Rating Chart
Model
Voltage
HDM-2
120
230 (CE)
HDM-2B
120
230 (CE)
NOTE: Shipping weight includes packaging.
The shaded areas contain electrical information for International models only.
Dimensions
Width
Model
(A)
HDM-2
749 mm
(29-1/2")
HDM-2B
743 mm
(29-1/4")
A
C
D
Front View
Figure 5. HDM-2 Dimensions
Form No. HDMCEM-1010
Watts
Amps
900
7.5
984
4.3
900
7.5
984
4.3
Depth
Height
(B)
(C)
578 mm
614 mm
(22-3/4")
(24-3/16")
568 mm
512 mm
(22-3/8")
(20-3/16")
B
E
Side View
CEE 7/7 Schuko
NEMA 5-15P
Figure 4. Plug Configurations
NOTE: Receptacle not supplied by Hatco.
Plug Configuration
NEMA 5-15P
CEE 7/7 Schuko, BS-1336, or AS 3112
NEMA 5-15P
CEE 7/7 Schuko, BS-1336, or AS 3112
Footprint
Footprint
Width (D)
Depth (E)
629 mm
484 mm
(24-3/4")
(19-1/16")
---
---
---
---
A
F
C
Front View
Figure 6. HDM-2B Dimensions
5
SPECIFICATIONS
BS-1363
AS 3112
Shipping Weight
69 kg (152 lbs.)
69 kg (152 lbs.)
65 kg (143 lbs.)
65 kg (143 lbs.)
Built-In
Built-In
Width (F)
Height G)
---
---
---
---
715 mm
483 mm
(28-1/8")
(19-1/16")
B
Side View
G