Getting Started; Using Your Monitor; Preset And User Modes - Sony Trinitron CPD-100ES Manual De Instrucciones

Getting Started

Before using this monitor, please make sure that the following
items are included in your package: Multiscan 100ES/200ES
monitor (1), power cord (1),
Disk " (1), and this operating instruction manual (1).
This monitor will sync with any IBM or compatible system
equipped with VGA or greater graphics capability. Although
this monitor will sync to other platforms running at horizontal
frequencies between 30 and 70 kHz, including Macintosh and
Power Macintosh system, a cable adapter is required. Please
consult your dealer for advice on which adapter is suitable for
your needs.
Step 1: With the computer switched off, attach the video
signal cable to the video output.
IBM or compatible
computer
to video output
Macintosh or compatible
computer
to video output
Macintosh adapter (not supplied)
Step 2:
Attach the power cord to the monitor and the other
end to a power outlet.
Power cord (supplied)
to a power outlet
Step 3:
Turn on the monitor and computer.
Step 4: If necessary, adjust the user controls according to
your personal preference.
The installation of your Multiscan 100ES/200ES is complete.
Enjoy your monitor.
1) VGA is a trademark of IBM Corporation.
2) VESA is a trademark of the non-profit organization, Video
Electronics Standard Association.
3) Macintosh is a trademark of Apple Computer Inc.
4) Windows ® is a registered trademark of Microsoft
Corporation in the United States and other countries.
4
" Windows Monitor Information

Using Your Monitor

Preset and User Modes

The Multiscan 100ES/200ES has factory preset modes for the 8 most
popular industry standards for true "plug and play" capability.
For less common modes, the Multiscan 100ES/200ES's Digital
Multiscan Technology will perform all of the complex adjustments
necessary to ensure a high quality picture for any timing between
30 and 70 kHz.
CPD-100ES/100EST and CPD-200ES/200EST
No. Resolution Horizontal
(dots × lines)
Frequency
640 × 480
1
31.5 kHz
640 × 480
2
43.3 kHz
800 × 600
3 46.9 kHz
800 × 600
4 53.7 kHz
832 × 624
5 49.7 kHz
1024 × 768
6 60.0 kHz
1024 × 768
7 68.7 kHz
1280 × 1024
8 64.0 kHz
For customers using Windows
To maximize the potential of your monitor, install the new model
information file from the supplied Windows Monitor Information
Disk onto your PC.
This monitor complies with the "VESA DDC" Plug & Play
standard. If your PC/graphics board complies with DDC, select
"Plug & Play Monitor (VESA DDC)" or this monitor's model name
as the monitor type in the "Control Panel" of Windows 95/98. If
your PC/graphics board has difficulty communicating with this
monitor, load the Windows Monitor Information Disk and select
this monitor's model name as the monitor type.
Recommended horizontal timing conditions
Horizontal sync width should be: >1.0 µsec.
Horizontal blanking width should be: >3.6 µsec. (Multiscan 100ES)/
Vertical sync width should be: < 560 µsec.
Note
CPD-100ES/100EST and CPD-200ES/200EST does not apply to
"
Macintosh 21 color mode.
Vertical Graphics
Frequency
Mode
60 Hz 1)
VGA Graphic
85 Hz 2)
VESA
75 Hz 2)
VESA
85 Hz 2)
VESA
3)
75 Hz Macintosh
16 " Color
75 Hz 2)
VESA
85 Hz 2)
VESA
60 Hz 2)
VESA
4)
95/98
>3.0 µsec. (Multiscan 200ES).