Usingthe Tools - Hoover SteamVac Dual V F7412-900 Manual Del Propietário

Usingthe tools
Attach hose
Unplug cleaner from electrical outlet.
I.Open hose connectionport (A).
2. Insert shorthose end, matching tabson hose
with same-sizedslots in connectionport.
3. Push hose intoport and lockin place.
4. Plug solution tube firmly intosolution
connectionport(B).
To remove hose
I.Squeeze latches {C}on top and bottom of
hose.Remove hose From port.Closedoor.
2. Remove solution tube From solution
connectionport.
B
I A B
Optional tools
A. SpinScruh" hand tool has rotating brushes
for extra scrubbing action on small carpet
areas, carpeted stairs and upholstery. For
some models, the brushes can be removed
for converting to the scrub module.
B. Stair/upholstery nozzle has a built-in
brush to help provide the scrubbing action
some spots may need for removal.
C. Scrub module with detachable scrub pad
attaches to the base oF the SpinScrub
TM
hand
tool (in place of brush module). Can be used
to scrub stubborn areas such as scuff marks,
dried spills, and in hard to reach areas on
hard surfaces.
D. Crevice Tool can be used to clean along
edges of carpet, carpeted stairs and on
upholstery.
SpinSerub
TM
hand tool
(Optional)
To remove the _1_
SpinScrub
TM
hand
tool pull too] down
and outward.
To reposition the
tool, reverse this
procedure.
0,
Y i
How to reattach tool cover
The tool cover is
designed with a
break-away feature
which allows it to
snap Free if it is
pushed open too
far.
To reattach, align
hinges of cover with
holes on sides of tool
storage area. Snap
door into place.
www.hoover, com
18