Installing The Dguard ® System; Laying The Cable Harness - digades dguard Instrucciones De Uso

3 Installing the dguard
3.1 Laying cable harness
The cable harness must be connected to the module, the button, the
vehicle battery ("terminal 30") and the switched positive pole of the circuit
switched by the ignition ("terminal 15"). The GPS antenna must be con-
nected separately to the module.
WARNUNG!
!
If you are unsure about the correct wiring on the circuit
switched by the ignition ("terminal 15"), ask your dealer
or garage for options for your motorcycle. Many models
already offer connection options provided by the manu-
facturer; they cannot all be listed here.
Fig. 5: Connecting the cable harness
1 dguard module
®
2 Live positive terminal ("terminal 15")
3 Vehicle battery ("terminal 30" and "terminal 31")
4 dguard button
®
5 Reserved for accessories/not in use
6 GPS antenna
INSTALLING THE dguard
system
®
SYSTEM
®
EN
11