Cm-4030Hd Installation Instructions - Channel Master Metro CM-4030HD Guía Para El Usuario

CM-4030HD Installation Instructions:

1. Place the Indoor Antenna on or near the TV set.
Identify the direction of the desired TV station's
transmitter by using www.antennaweb.org.
2. Connect the coaxial cable jumper cable to the
antenna input connector on the back of your TV set.
See Fig. 1 on page 8.
3. Plug the power cord into the back of the antenna. Plug
the power adapter into a standard power outlet.
See Fig. 1
4. Extend the telescoping VHF elements to their maximum
length. See Fig. 2
5. Optimize the reception by adjusting the position of the
telescoping elements for VHF channels, or by adjusting
the position and angle of the UHF loop antenna.
See Fig. 3
6. Installation is now complete.
Figure 2
Figura/Figure
Figure 3
Figura/Figure
7