Tabla de contenido
Publicidad
F E AT U R E S - O P E R AT I O N S
C L E A N I N G / M A I N T E N A N C E
EC - Eco-Smart
TM
The heater will now cycle between high (at 1500W) and
low (at 900W) heat settings to provide heat.
Thermostat Control
The next press of the Mode Button will activate the
thermostat setting, and the LCD will display "80°" as the
default temperature setting.
Your heater is equipped with a digital thermostat that
allows you to set your heater to a precise comfort level
(65 °F-85 °F) by pressing the Up (
Buttons on the control panel. The LCD Display will show
the selected temperature reading. When the preset
temperature is reached, the heater will shut off. When
the room temperature drops below the preset
temperature, the heater will automatically turn on again
to maintain the preset temperature level.
FrostProtect™ Setting
Your heater is equipped with FrostProtect™. The
heater will turn on automatically when the room
temperature drops below 40°F. To activate FrostProtect™,
press the Down (
) button until the LCD Display show
"40" and the FrostProtect™ icon ( ) will appear
on the LCD Display.
NOTE: To shut unit off at any time, press the Power
Button ( ) until LCD Display goes OFF.
NOTE: It is normal for the heater to cycle ON and OFF as
it maintains the preset temperature. To prevent the unit
from cycling, you need to change the thermostat setting.
The digital thermostat has memory; it will remember the
last temperature setting before the heater is turned off.
However, if the heater is unplugged, the digital
thermostat will no longer remember the previous
temperature setting. You will need to reset the digital
thermostat if the heater is unplugged.
CAUTION: FRONT GRILL IS HOT WHEN UNIT IS IN
OPERATION.
Oscillation
Press the Oscillation Switch to activate (I) or stop (O) the
oscillation feature.
NOTE: Please do not manually turn the heater on the
base. It is designed to turn only by motorized oscillation.
CLEANING/MAINTENANCE
Always unplug the heater before cleaning and allow the
heater to cool down.
1. Clean the unit with a soft cloth moistened with a mild
2. NEVER use abrasive or flammable solvents to clean
3. After cleaning, be sure to completely dry the unit
4. Store heater in a cool, dry location.
) and Down (
)
5. It is recommended that you store the unit in its
AUTO SAFETY SHUT-OFF
This heater is equipped with a patented, technologically-
advanced, ceramic controlled safety system that requires
the user to reset the heater if there is a potential
overheat situation. When a potential overheat
temperature is reached, the system will automatically
shut the heater off. It can only resume operation when
the user resets the unit.
RESET INSTRUCTIONS
If your heater shuts down:
1) Unplug the unit and wait 30 minutes.
2) Plug in and operate normally.
soap and water solution.
the unit.
with a cloth or towel.
original carton.
Publicidad
Tabla de contenido
