LG LWHD2500ER-Y9 Manual Del Usuario página 12

Installation
NO., NAME OF PARTS;
1 FRAME CURTAIN 2
2 SU PiP_RT BRACKET 2
3 SILL BRACK_ 2
4 LOCKNUT 4
6 '7
7 SCREW (T'YPE C) 5
8 SCREW_TYPED} 2
9 CARRIAGE BOLT 2
lO FOAM STRIP 1
l I
FOAM SEAL
1
12 WINDOWLOCKINGBRACKET 1
i3 DRAIN P_PE i
14 FRAMEGUIDE 2
15 FOAM-PE 1
SCREWDRIVER(Phi!ips and F!atead), RULER, KNIFE, HAMMER, PENCIL, LEVEL ]
PREPARATION OF CHASSIS
1, Remove the screws which fasten the cabinet at
both sides and at tlhe back, screws
2. S_ide the unit from the cabinet by gripping! the "_
base pan handle, and pulling fo,_ard while bracing
the cabinet,
3, Cut _e window _sh _a_ to the proper I!eng_
Peel off the ba_ing and a_ach the Foam-S,eaJ,@
to, the undersi_ of _e window sash.
4, Remove the backing from the top upper guide
Foam-PE @ and at_ch it to the bosom o_ _e
Upper Guide,
5 Attach _e upper guide onto the top of the cabinet
with 3 Type A screws ®.
6., insed the Frame Guides @ into,the i_ttom oll the
cabinet,
7, _n_d the Frame Curtain _ into t he Upper Guide
and Frame Guides @.,
8. Fasten the cudains to, the unit with 10 _¢p,e
A screws ®,
Uppe_ Guide
(Type
12 Ro,om, Air Co,nditioner