Prepare For Installation - Rockwell Automation Allen-Bradley SLC 500 B Serie Manual Del Usuario

Prepare for Installation

Make sure you have these items.
M4 or M5 (#10 or #12) Hardware
• phillips screw and star washer (or SEM screw — phillips screw with attached
star washer) for chassis mounting tabs
This chassis:
1746-A4
1746-A7
1746-A10
1746-A13
• phillips screwdriver
• drill
Documentation
For your:
• processor or I/O adapter module
• power supply
• communication modules and/or I/O modules
Installation Note
The power supply support panel (left end panel) has screws as indicated in the
illustration below. The center and right end panels are held in position by a molded
latch and do not require screws.
screw
Has:
4 mounting tabs
4 mounting tabs
6 mounting tabs
8 mounting tabs
latch
screw
latch
SLC 500™ Modular Chassis
Publication 1746-IN016C-MU-P - December 2003
5
latch
latch