Install Your Chassis - Rockwell Automation Allen-Bradley SLC 500 B Serie Manual Del Usuario

Install Your Chassis

1. Drill holes in the back panel of the enclosure for chassis mounting tabs.
ATTENTION
!
2. Install the hardware for the top mounting tabs.
TIP
Be careful of metal chips when drilling mounting holes
for the SLC chassis. Do not drill holes above an SLC
chassis if a processor and I/O modules are installed.
M4 or M5 (#10 or #12) phillips screw
and star washer (or SEM screw)
Scrape paint off the back panel for an electrical connection
between the chassis and back panel.
SLC 500™ Modular Chassis
Publication 1746-IN016C-MU-P - December 2003
7