BSV BS Pool EVOLINK Serie Manual De Usuario página 74

3.2.2.2- Connection of pH kit
Once the equipment (1) is installed, the following connections should be done.
1- Place the flange (10) on the pipe as indicated in the hydraulic connection
diagram. The flange (10) belongs to the injector and should be connected after
the electrolysis cell.
2- Place the flange (7) in the pipe as indicated in the hydraulic connection
diagram. The flange (7) belongs to the PH probe and should be
connected before the electrolysis cell and after the filter.
74 / 120
Manual EVOLINK v.5