Using The Video System; Switching The Video System On/Off; Selecting Cameras - Dometic PERFECTVIEW CAM360AHD Instrucciones De Uso

CAM360AHD
Color settings
➤ Select "BRIGHT", "CONTRAST" or "COLOR".
➤ Select the desired color settings.
Save Settings
➤ Save your settings.
➤ Exit the menu with
6

Using the video system

6.1

Switching the video system on/off

I
NOTE
The video system is switched on as soon as the ignition of the vehicle is
switched on.
In its basic setting, the video system shows two images on a split screen:
A 360° panorama view on one half and the image from the front camera on the
other half (fig. 6, page 4).
The 360° panorama view is always displayed. The display of the individual image
from one of the four cameras can be selected with the arrow buttons or by using a
turn signal and by switching to reverse gear.
➤ Press
to switch off the video system.
6.2

Selecting cameras

➤ Press
, ,
✓ The symbol (fig. 6 2, page 4) for the relevant camera is highlighted.
➤ Operate the left or right turn signal to activate the camera image of the relevant
side.
➤ Shift to reverse gear to activate the rear camera image.
EN
.
to select the front, rear, left or right camera.
,
Using the video system
15