Installing The Video System; Information On Installation - Dometic PerfectView CAM360AHD Instrucciones De Montaje

Sistema de cámara de 360
Ocultar thumbs Ver también para PerfectView CAM360AHD:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 90
CAM360AHD
The control unit allows the following options:
• A permanent split screen, or a split screen triggered by a control signal
• Automatic full screen mode for the reversing camera as a rear mirror function
• Permanent full screen mode for the 360° panorama view while the screen is
upright
Videos from the cameras can be saved (flash drive) according to the circular buffer
principle and played back within the camera system. A recording sequence lasts
5 minutes, then the next recording sequence begins automatically. Once the
memory is full, the oldest file is overwritten automatically.
To play the videos on a computer, the video format H.264 must be supported.
7

Installing the video system

7.1

Information on installation

!
CAUTION! Risk of injury
• Select a location for the camera and attach it firmly enough so that it
cannot under any circumstances fall off and injure bystanders (for
example, by being knocked off by branches brushing over the roof
of the vehicle).
• Secure the parts of the video system installed in the vehicle to ensure
they cannot become loose under any circumstances (sudden
braking, accidents) and cause injuries to vehicle occupants.
• Secure any parts of the system concealed by the bodywork in such a
manner that they cannot be come loose or damage other parts or
cables, or impair vehicle functions (steering, pedals, etc).
• Always follow the safety instructions issued by the vehicle
manufacturer.
Some work (e.g. on retention systems such as the AIRBAG etc.) may
only be performed by qualified specialists.
EN
Installing the video system
19

Publicidad

Tabla de contenido
loading

Tabla de contenido