Intended Use; Technical Description - Dometic PERFECTVIEW CAM360AHD Instrucciones De Uso

Intended use

3 Intended use
!
WARNING! Danger of personal injury by vehicle
Video systems are designed merely as an additional aid for reversing,
however this does not relieve you of the duty to take proper care
when reversing, turning or driving forwards.
The CAM360AHD video system (ref. no. 9600000509) is designed for use in vehi-
cles. The cameras transmit images in a 360° panoramic view, providing you with a
birds-eye view of the vehicle's environment to the sides, in front and behind.
In addition, one of the four cameras can be shown selectively (split screen). The
selection of an individual camera image depends on the input signals from the turn
signals and reverse gear. In addition, the selection can also be made via the remote
control provided.
It is used to monitor the direct vehicle environment, e.g. when driving, changing
lanes, manoeuvring or parking.
4

Technical description

Four 180° wide wangle cameras are located on the front, the rear, and the left and
right sides of the vehicle. A video processor merges the recorded images into a sin-
gle image in real time that shows a birds-eye view of the vehicle and its surroundings
at the front, rear and sides.
The camera system is switched on as soon as the vehicle is started.
Depending on the settings, individual cameras can be activated by input signals,
e.g. by using a turn signal or reverse gear.
The control unit features four camera inputs and connects the cameras to the screens
via a plug connector.
The control unit allows the following options:
• A permanent split screen, or a split screen triggered by a control signal
• Automatic full screen mode for the reversing camera as a rear mirror function
• Permanent full screen mode for the 360° panorama view (birds-eye view)
Videos from the cameras can be saved (USB drive) according to the circular buffer
principle and played back within the camera system. A recording sequence lasts up
to 10 minutes, then the next recording sequence begins automatically. Once the
memory is full, the oldest file is overwritten automatically.
8
CAM360AHD
EN