Intended Use; Technical Description - Dometic PerfectView CAM360AHD Instrucciones De Montaje

Intended use

5 Intended use
!
WARNING! Danger of personal injury by vehicle.
Video systems are designed merely as an additional aid for reversing,
however this does not relieve you of the duty to take proper care
when reversing, turning or driving forwards.
I
NOTE
• The CAM360AHD video system is not suitable for installation in
construction machines.
• The video system is suitable for installation in vehicles up to 10 m in
length.
The CAM360AHD video system is designed for use in vehicles. The cameras trans-
mit images in a 360° panoramic view, providing you with a birds-eye view of the
vehicle's environment to the sides, in front and behind.
The images of the cameras can be shown individually (split screen). The selection of
an single camera image depends on the input signals from the turn signals and
reverse gear. In addition, the selection can also be made via the remote control
provided.
The video system is used to monitor the direct vehicle environment, e.g. when
driving, changing lanes, manoeuvring or parking.
6

Technical description

Four 180° wide wangle cameras are located on the front, the rear, and the left and
right sides of the vehicle. A video processor merges the recorded images into a
single image in real time that shows a birds-eye view of the vehicle and its surround-
ings at the front, rear and sides.
The camera system is switched on as soon as the vehicle is started.
The camera system provides a 360° panoramic view and transmits the images in a
birds-eye view of the vehicle's environment to the sides, in front and behind.
Depending on the settings, single cameras can be activated by input signals, e.g. by
using a turn signal or reverse gear.
The control unit features four camera inputs and connects the cameras to the screens
via a plug connector.
18
CAM360AHD
EN