König Electronic HAV-MCS30 Manual De Uso página 11

ID3 Function
During MP3 disc playback, press the ID3 (39) button to display any
ID3 tagging information that may be encoded onto the disc.
Information such as album, title and artist will scroll across the display
when this function is selected.
PLAY MODE CONTROL
1. Repeat the entire track
Select the track to be repeated and begin playback. Press the PLAY
MODE (17, 34) button once. The RPT indicator will flash in the display
and the selected track will be repeated continuously.
2. One Folder Repeat
Select the folder to be repeated and begin playback. Press the PLAY
MODE (17, 34) button twice. The RPT and ALBUM indicator will show
in the display and the selected folder will be repeated continuously.
3. Repeat all
Press the PLAY MODE (17, 34) button three times. The RPT ALL
indicator alights in the display and all the tracks of the disc will be
repeated continuously.
4. Intro playback
Press the PLAY MODE (17, 34) button four times to play a brief intro
of each track for 10 seconds, the INTRO indicator is shown in the
display.
5. Random playback
The random playback feature allows you to play all the tracks of the
current disc in a random order. You can select random playback while
the discs are playing or when playback is stopped. Press the PLAY
MODE (17, 34) button five times to start random playback mode, The
RDM indicator is shown in the display. If necessary, press the PLAY/PAUSE (14, 49)
button to begin playback. The player will randomly select a track to play from the disc.
Programmed Playback
It is possible to program a selection of up to 64 files for playback.
Individual tracks can be programmed more than once.
1. In stop mode, after a CD containing MP3 or WMA tracks is loaded,
Press the PROG / CLK ADJ (6, 41) button. In stop mode, MEMORY
and P--01 will show in the display.
2. Press the FOLDER– (54) or FOLDER+ (44) repeatedly to select the
desired folder number.
3. Press the pressing / / TUNING
(20, 37, 50) buttons repeatedly to select the desired file number in
the selected folder.
4. Press the PROG / CLK ADJ (6, 41) button to confirm the file in the first program
location. P--02 will show in the display and the device will be ready for the next file to be
programmed.
or / / TUNING
11