Velleman DVM171THD Manual Del Usuario página 3

analysis software: software in English only, for Windows® XP, Vista,
Windows 7 (32 and 64 bit)
multi-mode to start logging
long battery life
selectable measuring cycle: 2 s, 5 s, 10 s, 30 s, 1 min, 5 min, 10 min, 30 min,
1 h, 2 h, 3 h, 6 h, 12 h, 24 h.
5. Use
1. First install the data logger software on a personal computer, by inserting the
enclosed disc into the CD drive and following the instructions on the screen.
2. Remove the protective cover [1] from the data logger, plug the data logger
into a free USB slot on the personal computer and start the data logger
software.
3. Set up the data logger software and press the Setup button. Refer to the help
function of the data logger software (Help > Help topics...) for more
information on the use of the software and setup of the data logger.
4. Remove the data logger from the USB slot and place back the protective
cover [1].
5. Place the device in a location where recording of ambient temperature and/or
relative humidity is required. Refer to the technical specifications for allowed
operating temperature range.
V. 03 – 12/06/2013
DVM171THD
1. protective cover
2. USB connector to PC port
3. start button
4. RH and temperature sensors
5. alarm LED (red/yellow)
6. recording LED (green)
7. mounting bracket
3 ©Velleman nv