Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CONTENT
Illustrations
Technical data
Switching on and off
Maintenance
Warranty
Declaration of Conformity
Service
Electric Hedge Trimmer
Technical data
Operating Voltage
Nominal Frequency
Nominal Consumption
No-load Speed n
0
Cutting length
Cutting capacity
Weight (without flex)
Noise Pressure Level L
pA (according to EN 60745-1+EN 60745-2-15)
Vibration
(according to EN 60745-1)
Class of protection: II / DIN EN 60745/VDE 0740
Emissions
- The specified vibration emission value was measured by a standardized test methods and can compare with other
power tools are used.
- The specified vibration emission value can also be necessary for the assessment of work breaks are used.
- The specified vibration emission value can vary during the actual use of the electric tool by specifying the value,
depending on the way how to use the power tool.
- Note: You create the privilege against vascular pulsations of the hands in time breaks.
The noise pressure level at the place of work can exceed 80 dB(A). In such cases the operator will require noise
protection (e.g. wearing of ear protectors).
Attention: Noise protection! Please observe the local regulations when operating your device.
Interference suppressed in accordance with EN 55014, EN 61000-3-2, EN 61000-3-3.
We reserve the right to make changes to the technical specifications.
The devices are manufactured in accordance with the provisions of EN 60745-1and EN 60745-2-15 and fully comply with
the provisions of the German Product Safety Act.
GB | Operating Instructions
GB-1
Page
1 - 3
4 - 7
GB-1
GB-2
GB-2
GB-4
GB-5
GB-5
GB-5
GB-5
GB-5
GB-5
GB-6
GB-6
GB-6
GB-6
GB-6
V~
230-240
Hz
50
W
550
-1
min
1700
mm
450
mm
16
kg
3,1
dB (A)
92,5
K 3,0 dB (A)
2
m/s
4,085 K 1,5 m/s
Translation of the original Operating Instructions
2
Publicidad
Capítulos
Tabla de contenido
