OBO Bettermann GES R2 Instrucciones De Montaje página 31

GES R2
Note! If the GES R2 floor socket is inserted in screed floors, then screed
boxes of type UD GES R2 must have been installed in the screed
floor.
The GES R2 floor socket must be mounted and installed after the
floor is installed .
The GES R2 floor socket has a modular structure and offers ins-
tallation space for, for example, two Modul 45 sockets (VDE/NF)
or Modul 45 universal data technology supports and space for two
additional data and multimedia connections . The system compo-
nents are interconnected using locking straps .
The GES R2 floor socket is a closed installation protection housing
(an exception is the area of the additional data and multimedia
connections) . The installation cables can be inserted either from
below or from the side . For cable entry, a space of 10 mm beneath
the GES R2 floor socket is required .
The GES R2 floor socket is equipped with strain reliefs .
The additional data and multimedia connections are also freely
accessible from below and from the side .
The metal and plastic hinged lids differ in their construction .
The locking hooks of the plastic lids are offset by 12° compared to
the locking hooks of the metal lids (see Fig .
Example (see Fig .
– Floor socket with double Modul 45 cover plate and metal hin-
ged lid with locking slider
– Floor socket with double Modul 45 cover plate and plastic hin-
ged lid with cord outlet
– Floor socket with 1 .5x cover plate and plastic hinged lid with
cord outlet
Depending on the lid variant, the GES R2 floor socket is approved
for dry or wet-cleaned floors .
The following may be wet cleaned:
– Tube body lid
– Metal blanking lids
– Metal hinged lid for closed lid
The following should be dry cleaned:
– Metal hinged lid for opened lid
– Plastic hinged lid
– Plastic blanking lid
Information on the GES R2 floor socket
):
1 – VDE sockets
3
– VDE sockets
3 – British standard sockets
2
, ) .
4
4
5
EN | 31