Installation With Cover Plate For 1 5X Modules; Installation Of Additional Data Cables; Final Work On The Installation Socket - OBO Bettermann GES R2 Instrucciones De Montaje

GES R2
Preparatory work
See Fig .
1 . Insert the partition
3 .
Installing and mounting the socket
See Fig .
1 . Attach the sockets to the split 1x Modul 45 cover plate (B1) .
2 . Electrically connect the installation cable
3 . Insert the strain relief in the 1x Modul 45 cover plate (B2) .
4 . Clamp the installation cable in the strain relief (B3) .
5 . Engage the mounted 1x Modul 45 cover plate in the installation
socket (B4) .
Installing and mounting the data module
See Fig .
1 . Attach the sockets to the 1x Modul 45 cover plate (C1) .
2 . Connect the installation cable for data connections to the data
socket
3 . Insert the data socket into the data module from below (C2) .
4 . Engage the mounted 1x Modul 45 cover plate in the installation
socket (C3) .
11 5 3

Installation with cover plate for 1 5x modules

1 . Attach the British Standard sockets to the 1 .5x cover plate (see
Fig . ,
2 . Electrically connect the installation cable .
3 . Insert the strain relief in the 1 .5x cover plate .
4 . Clamp the installation cable in the strain relief .
5 . Engage the mounted 1 .5x cover plate in the installation socket .
11 5 4

Installation of additional data cables

See Fig .
1 . Connect the installation cable for data connections to the data
socket .
2 . Insert the data socket into the mounting plate for data cables
from below .
3 . Engage the mounting plate in the installation socket .
11 6

Final work on the installation socket

Tighten the three screws (see Fig .
nings using the battery-operated screwdriver .
Installing/mounting the GES R2 floor socket
, A:
1 with the centring spigot
, B:
, C:
5
.
2
) .
:
2 in the recess
4 .
, 1 ) of the universal faste-
EN | 35