Connecting Antennas - Pioneer VSX-S300-k Manual De Instrucciones

Connecting a TV and playback component
If you have an HDMI or DVI (with HDCP) equipped component (Blu-ray Disc player, etc.), you can connect it to this
receiver using a commercially available HDMI cable.
If the TV and playback components support the Control with HDMI feature, the convenient Control with HDMI
functions can be used.  "Control with HDMI function"
• The following connection/setting is required to listen to the sound of the TV over this receiver.
– If the TV does not support the HDMI Audio Return Channel function, connect the receiver and TV with audio
cables (as shown).
– If the TV supports the HDMI Audio Return Channel function, the sound of the TV is input to the receiver via the
HDMI terminal, so there is no need to connect an audio cable. In this case, set ARC at HDMI Setup to ON.
 "HDMI Setup"
HDMI/DVI-compatible components
(Blu-ray Disc player, etc.)
HDMI OUT
STB IN DVD/DVR IN BD/BDR IN GAME IN
HDMI
VIDEO ( ANALOG
AUX
ASSIGNABLE
IN
(
OUTPUT 5 V
0.1 A MAX )
MONITOR
OUT
ADAPTER PORT
Bluetooth® ADAPTER
AS-BT100 or AS-BT200
(sold separately)
Refer to the Operating Instructions in CD-ROM for
instructions on how to connect and setup the Bluetooth
ADAPTER and how to play music.
Plugging the receiver
Only plug in after you have connected all your components to this receiver, including the speakers.
1
Plug the supplied power cord into the AC IN socket on the back of the receiver.
2
Plug the other end into a power outlet.
DIGITAL AUDIO OUT
HDMI IN
OPTICAL
OUT COAXIAL
OPTICAL
CD IN TV IN DIGITAL AUX IN
ANALOG SURR BACK/ AUDIO
) AUX FRONT HEIGHT
L
( Single )
R
IN SUBWOOFER
PRE OUT
AC IN
To power outlet
HDMI/DVI-compatible TV
This connection is
necessary in order to
VIDEO IN
see the OSD of the unit
on the TV.
If the TV does not support the
HDMI Audio Return Channel
function, this connection is
required to listen to the TV
sound over the receiver.
SPEAKERS
A
FRONT
SUB
R L
CENTER WOOFER SURROU
R
If the device you wish to
connect does not have an
HDMI output terminal, it
can be connected via these
 "
terminals. Connecting
your component with no HDMI
"
terminal
About video outputs connection
This receiver is not loaded with a video converter.
When you use HDMI cables for connecting to the
input device, the same cables should be used for
connecting to the TV.
The signals input from the analog (composite) video
input of this unit will not be output from the HDMI
OUT.
Important
• If the receiver is connected to a TV using an HDMI
cable, the on-screen display (OSD) will not be
displayed. Be sure to use a standard RCA analog
video cable to connect. In this case, switch the TV
input to analog to see the OSD screen (for setup,
etc.) on the TV.
• When the Control with HDMI function is ON and
the receiver is connected to a compatible TV with
an HDMI cable, and you switch the input of the
TV to composite, the input of the receiver may
automatically switch to TV. If this happens, switch
the receiver's input back to the original input, or
turn OFF the Control with HDMI function. 
"HDMI Setup"

Connecting antennas

Connect FM wire antenna and the the AM loop antenna
as shown below.
FM
UNBAL
75
AM LOOP
ANTENNA
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by PIONEER CORPORATION is under
license. Other trademarks and trade names are those of
their respective owners.
CAUTION
• Handle the power cord by the plug part. Do not pull
out the plug by tugging the cord, and never touch the
power cord when your hands are wet, as this could
cause a short circuit or electric shock. Do not place
the unit, a piece of furniture, or other object on the
power cord or pinch the cord in any other way. Never
make a knot in the cord or tie it with other cables. The
power cords should be routed so that they are not
likely to be stepped on. A damaged power cord can
cause a fire or give you an electric shock. Check the
power cord once in a while. If you find it damaged,
ask your nearest Pioneer authorized independent
service company for a replacement.
• Do not use any power cord other than the one
supplied with this unit.
• Do not use the supplied power cord for any purpose
other than that described below.
• The receiver should be disconnected by removing the
mains plug from the wall socket when not in regular
use, e.g., when on vacation.
3
En