Hultafors RL Instrucciones De Uso página 15

Operation
• The rotating laser is a precision instrument and has a magnetically damped
oscillating compensator for automatic self-levelling.
• RL laser can be tripod mounted or placed directly onto the floor.
• Switch on the laser by releasing the locking lever; the plumb point is then
projected onto the floor.
• The display is green when the device is within the self-adjusting range. If
the display is red the device must be re-positioned on a more level surface.
• The rotating laser has two function switches.
Rotation speed mode
Press this switch to select 300 rpm or 600 rpm. If the device is not horizontal,
the rotation stops automatically. The laser cannot be used for the vertical
projection of the laser beam.
Remote control
You can use the remote control after inserting two AAA batteries.
Receiver UE
The laser detector is recommended for when sunlight or distance may make
locating the beam more difficult. With the laser detector, your Rotating Laser can
work outdoor up to a maximum distance of 150m.
GB
17
Fine accuracy
Coarse accuracy