Bionaire BAFE1507 Manual De Instrucciones página 4

OPERATING
INSTRUCTIONS
1. Set fan on a dry, level surface.
2. Pull the retractable cord until it has reached your
desired length. Push the retract "
shorten the length of the cord. Please note that
when pulling the cord out you will feel the
resistance once it has reached its maximum
length of 1.5 meters (5 feet). Do not extend the
cord beyond its maximum length.
3. Plug power cord into the appropriate outlet.
4. To turn the fan on:
A. (Model BAFE1507) The fan will beep
indicating it is on. Press the power button " "
to start the fan. The speed light of the last
selection will light up as long as the fan
remains plugged in. If the fan is unplugged
and plugged back in, it will automatically reset
to speed 1.
B. (Model BAFM1503) Press the power button
" " to start the fan. The fan will only start if
one of the speed buttons has already been
selected AND the timer is off " ". If no speed
has been selected, push your desired
selection to start the fan.
5. Selecting the speed:
A. (Model BAFE1507) The speed is adjusted by
pushing the speed button "
speed mode into three speed levels: Speed 1,
Speed 2 or Speed 3.
B. (Model BAFM1503) Push buttons 1, 2 or 3 to
select your desired speed.
6. If you would like to program the timer:
A. (Model BAFE1507) Press the timer button " "
to select the following timer settings: 1 hour, 2
hours, 4 hours, 8 hours or timer off (all lights
off).
B. (Model BAFM1503) Turn the knob to the
desired time setting: 20 minutes, 40 minutes,
60 minutes, 80 minutes, 100 minutes, 120
minutes.
The fan will automatically turn off once the set
time is reached.
7. To oscillate the fan front grill, push the oscillation
button " " to turn it on. To stop the oscillation,
push the oscillation button "
off.
8. (Model BAFE1507 only) Once the fan is on and
you have selected the desired speed, you can
9. (Model BAFE1507 only) To select sleep mode,
" button to
AROMA DIFFUSER FUNCTION
10. If you would like to use the aroma diffuser
" to cycle the
11. Press the aroma diffuser button " " to turn this
" again to turn it
12. Your Aroma Diffuser Fan also allows you to
3
select breeze mode if you would like the fan to
mimic natural breeze. To select this mode, push
the breeze & sleep button selecting breeze mode
" ".
turn the fan on and select the desired speed
then push the breeze & sleep button to select
the sleep mode " ". It cycles through the speed
settings in order.
function along with the fan, follow these
instructions to insert the scented oil bottle (NOT
INCLUDED WITH THE PRODUCT).
A. Lift the scented oil bottle compartment cap
up (Figure 1).
B. Insert the neck of the scented oil bottle with
opening facing up onto the self-adjusting
clip of the scented oil bottle compartment
until it locks into place
(Figure 2).
Note: The bottle compartment has a self-
adjusting clip that will accept refill bottles for
all major brands of scented oil.
C. Close scented oil bottle compartment cap
Fig. 1
(Figure 3).
function on or off. This function will cycle off
along with the fan. The fan will recall the last
setting used for the aroma diffuser. The number
of hours each scented oil bottle refill will work
should vary by brand (please refer to the
specifications of each brand manufacturer). The
scented oil will be depleted over time. Replace
the bottle when needed. Once you are done
using this function, follow the instructions listed
on Step 7 making sure to remove the used
scented oil bottle refill first before you place a
new one to be used the next time you wish to
use this function.
adjust the intensity of the aroma diffusion. To
select the desired setting, move the Aroma
Diffuser Intensity Lever to the right to increase
the intensity or to the left to decrease it.
Fig. 2 Fig. 3