GENERGY LIMITED3000 Instrucciones De Uso página 54

1 Loosen and remove the screw (1).
2 Lift the filter cover (2) and remove the sponge filtering (3).
3 Clean the sponge in a soap and water solution. Allow it to dry completely.
4 Dip the dry sponge in oil, the same type used in the generator engine.
5 Drain the oil excess with your hand, the filter only has to be slightly moist with
oil.
6 Once cleaned and drained, reinstall the filter sponge in the filter housing and
close it with the cover locking screw
NOTE: If the filter has not been well drained, the engine may produce an
abnormal smoke at first use, or the engine may malfunction due to bad air
intake.
53