JVC KD-AR5500 Manual De Instrucciones página 29

Indications
VSS
Voice support
system
VSS Level
VSS level
Language
Language
Ext Input
*
3
External input
Telephone
* 4
Telephone muting
Amp Gain
Amplifier gain
control
SOURCE
Source
USER DAY
(USER NIGHT)
User color
R
Red
G Green
B Blue
* 3 Cannot be selected if the source is "CD-CH" or "EXT-IN."
* 4 Only for KD-AR5500.
* Depends on the "Dimmer" setting.
5
Selectable settings, [reference page]
Beep: A beep sounds when you operate the receiver.
Voice: [Initial]; Guidance is announced in the language you have
selected when you operate the receiver.
You can adjust the volume level of the VSS sounds.
Off (cancels) O 1 O 2 O 3 [Initial] O 4
You can select the language for the VSS.
English [Initial] O Español (Spanish) O Français (French) O
(back to the beginning)
• The indication on the display will also be shown in the selected
language.
Changer: [Initial]; To use a JVC CD changer, [13].
Ext In:
To use any external component (other than SIRIUS DLP),
[34].
Muting1/Muting2: Select either one which mutes the sounds while
using the cellular phone.
Off: [Initial]; Cancels.
• If CD or CD changer has been selected as the source, playback
pauses during telephone muting.
You can change the maximum volume level of this receiver.
High PWR: [Initial]; Volume 0 – Volume 50
Low PWR: Volume 0 – Volume 30 (Select this if the maximum
power of the speaker is less than 52 W to prevent them
from damaging the speaker.)
Off:
Deactivates the built-in amplifier.
[Initial: AllSource]; You can select your favorite display color for each
source (or for all sources), [30, 31].
You can create your own colors, and select them for the display color,
[31].
USER DAY: User color during the day time
USER NIGHT:
User color during the night time
00 – 11 [Initial: USER DAY: 07, USER NIGHT: 05]
00 – 11 [Initial: USER DAY: 07, USER NIGHT: 05]
00 – 11 [Initial: USER DAY: 07, USER NIGHT: 05]
.
* 5
.
*
5
29