Important Safeguards - Russell Hobbs Explore Mix & Go COOL Manual De Instrucciones

Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all
packaging before use.

IMPORTANT SAFEGUARDS

Follow basic safety precautions, including:
This appliance can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been
supervised/instructed and understand the hazards involved.
Children must not use or play with the appliance. Keep the appliance and
cable out of reach of children.
Always disconnect the appliance from the mains supply socket if it is left
unattended and before assembling, disassembling or cleaning.
Misuse of the appliance may cause injury.
If the cable is damaged, it must be replaced by the manufacturer, its service
agent, or someone similarly qualified, to avoid hazard.
Care must be taken when handling sharp cutting blades during emptying
and cleaning.
Never process hot or boiling liquids. Allow them to cool before processing.
• Don't put the motor unit in liquid.
• Don't use accessories or attachments other than those we supply.
• Don't use this appliance for any purpose other than making smoothies.
• Don't operate the appliance if it's damaged or malfunctions.
• Don't run the motor for more than 1 minute, or it may overheat. After 1 minute, switch off
for at least 2 minutes, to let the motor cool.
DIAGRAMS
1. Bottle
2. Seal
3. Blade unit
4. Motor unit
BEFORE USING FOR THE FIRST TIME
Clean the appliance before using it for the first time.
USING YOUR MIX & GO
1. Sit the motor unit on a dry, firm, level surface.
2. Put the plug into the power socket.
3. Add the ingredients to the bottle then screw on the blade unit. Don't fill past 600ml.
4. Turn the bottle upside down.
Align d on the bottle with u on the motor unit.
5.
6. Lower the blade unit into the motor unit.
7. Press the bottle down to run the motor. Release it to stop the motor.
8. For "hands free" operation, turn the bottle left to run the motor (FIG A), then back, to stop.
9. Once finished, lift the bottle off the motor unit, turn it upright, unscrew the blade unit then
screw the lid onto of the bottle.
10. Flip the cap on the lid open to pour, press it closed to store.
HOUSEHOLD USE ONLY
5. Lid
6. Cooling tube
¬ dishwasher – top rack
3