Care And Maintenance; Environmental Protection - Russell Hobbs Explore Mix & Go COOL Manual De Instrucciones

USING THE COOLING TUBE
The cooling tube helps to keep your drink cooler and fresher for longer.
1. Open the cooling tube screw cap and fill the tube with water to the MAX mark on the tube.
2. Replace the screw cap.
3. Place the cooling tube in the freezer (or freezer compartment of your fridge) until the water
inside has frozen.
4. Once frozen, screw the cooling tube into the underside of the lid (FIG B)
5. Follow the previous instrctions to make your drink and once made, fit the lid and cooling
tube to the bottle. Remember, when using the cooling tube only fill the bottle up to the
cooling tube MAX marking (

CARE AND MAINTENANCE

1. Unplug the appliance.
2. Wipe the the motor unit with a damp cloth.
3. Remove the seal with something blunt, like the handle of a fork.
4. Hand wash the removable parts.
5. Press the seal back into place with something blunt, like the handle of a fork.
¬ You may wash these parts in the top rack of a dishwasher.
If you use a dishwasher, the harsh environment inside the dishwasher will affect the surface
finishes.
The damage should be cosmetic only, and should not affect the operation of the appliance.

ENVIRONMENTAL PROTECTION

W
To avoid environmental and health problems due to hazardous substances in electrical and
electronic goods, appliances marked with this symbol mustn't be disposed of with unsorted
municipal waste, but recovered, reused, or recycled.
).
MAX
4