Bosch HDC100 Instrucciones De Funcionamiento Y Seguridad página 4

161992A071-HDC100_HDC100 1/10/14 1:02 PM Page 4
UXILI RY
H NDLE ON
LEFT
INSTALLING ON THE LEFT OR RIGHT SIDE
You can assemble the attachment to the tool
so that the auxiliary handle can be gripped with
either the left hand for right-handed operators
or the right hand for left-handed operators
(Fig. 4). The attachment comes assembled for
right-handed operation (the side handle is
gripped with the left hand).
FIG. 4
RIGHT-H NDED
OPER TION
To assemble the attachment so that the
auxiliary handle is gripped with the right hand,
loosen the handle and remove the attachment
from the tool (Fig. 5). Open the housing clamp
lever and remove the auxiliary handle
assembly from the housing (Fig. 6). Rotate the
handle assembly 180 degrees and slide back
onto the housing (Fig. 7). Secure the housing
to the handle by closing the housing clamp
lever (Fig. 8).
FIG. 5
FIG. 7
-4-
UXILI RY
H NDLE ON
RIGHT
LEFT-H NDED
OPER TION
FIG. 6
FIG. 8