Sacd Sound Mode - Teac DV-20D Manual Del Usuario

DVD/DVD-A/CD/SACD/VCD/MP3/WMA
D
E
SACD
34
E
D
Playback 3
D To stop and resume playback of a DVD
If you press the STOP button (H) during DVD playback, the unit
runs in RESUME mode, as the display indicates.
If you want to cancel the RESUME mode and stop playback
completely, press the STOP button (H) again.
To resume playback
When you stop playback of DVD by pressing the STOP button
(H), the interrupted point is kept in memory and playback
starts from that point when you press the PLAY button (y).
< The memory is cleared if you disconnect the power cord.
< If you open the disc tray during playback of a DVD, "OPEN" is
displayed on the TV screen. If you close the disc tray with the
DVD still on it, "CLOSE", "DISC LOADING" and "PRESS PLAY
TO RESUME PLAY" are displayed on the TV screen and
playback starts from the beginning of the disc, not the point
where playback was stopped. If you press the PLAY button
(y) before that message has gone out, playback starts from
the interrupted point.
E To open the disc tray
Press the OPEN/CLOSE button (L) to open the disc tray.
< When the tray is left openingfor about 1.5 minutes, the tray will
close automatically.
F Power Off Function
When the unit is left in the stop mode for about 8 minutes, the
unit enters power standby mode.

SACD Sound Mode

Hybrid SACDs have two layers, the CD and SACD layers.
The SACD layer may contain Stereo area and Multi-channel area.
Layer Changing
Press the TITLE button repeatedly to choose the CD layer or
the SACD layer when playback is stopped.
< You cannot switch between the CD and SACD layers during
playback.
Channel Changing
Press the AUDIO button repeatedly to choose "SACD MULTI"
(Multi-channel) or "SACD" (Stereo) when playback is
stopped.
< The sound mode will appear on the front panel.
ENGLISH