General Specifications - Southwire 10010S Instrucciones De Uso

Introduction
The Southwire 10010S analog multimeter measures 5 functions
with 16 ranges. This meter is fully tested and, with proper use,
will provide many years of reliable service.
WARNINGS
• Read, understand and follow the Safety Rules and Operating
Instructions in this manual before using this meter.
• The meter's safety features may not protect the user if not
used in accordance to the manufacturer's instructions.
• Ensure that the test leads are fully seated in the input jacks and
keep fingers away from the metal probe tips when taking
measurements.
• Before changing functions using the rotary function switch,
always disconnect the test leads from the circuit under test.
• Use only UL listed test leads with the proper safety category
rating.
• Comply with all safety codes.
equipment when working near live electrical circuits - particularly
with regard to arc-flash potential.
• Use caution on live circuits. Voltages above 30 V AC RMS,
42 V AC peak, or 60 V DC pose a shock hazard.
• Verify meter's operation by measuring a known voltage
• Do not use meter or test leads if they appear damaged.
• Do not use the meter in wet or damp environments or during
electrical storms.
• Do not use the meter near explosive vapors, dust or gasses.
• Do not use the meter if it operates incorrectly. Protection may
be compromised.
• Do not apply voltage or current that exceeds the meter's
maximum rated input limit.
Use approved personal protective
1
Input Limits
Function Maximum Input
Voltage AC, Voltage DC 500V AC/DC
Amperage µA, mA DC Maximum Amperage 250mA,
Maximum Voltage 250V,
Resistance 250V AC/DC

General Specifications

Input Impedance
2k /V
AC Voltage bandwidth
50 to 60Hz
Operating Temperature
o
32 F to 104
Storage Temperature
o
14 F to 140
Relative Humidity
under 80%
Operating Altitude
7000ft (2000m) max.
Over voltage
500V
Battery
One "A A" 1.5V Battery
Dimensions/Weight
3.9" x 2.5" 1.4"/0.28lb (100 x 64 x 35mm/125g)
Safety
For indoor use and in accordance with Overvoltage
Category II, Pollution Degree 2. Conforms to UL 61010-1 v.2
o o o
F (0 C to 40 C)
o o o
F (-10 C to 60 C)
2