PLAYKIN POLICE Manual Del Usuario página 61

ATTACH THE FRONT WHEEL
5
1. Insert the M8x170 bolt into the hole on one fork of handle bar.
2. Slide a Ø10 washer onto the M8x170 bolt.
3. Fit the Front wheel onto the M8x170 bolt.
4. Slide another Ø10 washer onto the M8x170 bolt. Contiue pushing the bolt until it pass thrgouth
the other fork of handle bar.
5. Tigten the Ø8 locknut to the bolt with the Hexwrench.
HINT: Use the spanner to hold the M8x170 bolt while tightening the Ø8 locknut with the
hexwrench.
6. Fit the tabs of the front lights into the slots on the handle bar.
4
61
Spanner
6
Hexwrench
2
3
x1
x1
1
EN