Roadstar I-RX16BT Manual De Instrucciones página 10

7 English
sound.
TIMER: Use up/down and left/right cursors (12/13 and 14/15) to adjust the time then
confirm with "OK" (16) and the timer will start.

To pause the timer, press "OK", to resume it, press "OK" again.
 To cancel the timer, press and hold "OK" button until "00:00" appears, then
press "OK" to exit.
LANGUAGE: Choose between 17 available languages available.
DIMMER: To adjust the backlight of the LCD with below settings:

Power Saving: Set a down level when there is no operation after 15 seconds.
 Turn on: The backlight will not dim down even there is no operation. You can
adjust the backlight leve you want.
DISPLAY: To choose the display mode between "color" or "monocrome".
POWER MANAGEMENT: To set the auto-standby time if there is no internet signal
received in order to save power. The default setting is 30 minutes (the radio will go in-
to Standby after 30 minutes when the radio does not receive any internet signal).
SLEEP TIMER: To set the timer to put the radio on standby after certain time elapsed,
from 15 minutes to 180 minutes with the step of every 15 minute.
You can also set this timer by pressing repeatedly the "Sleep Timer" button (18) from
the remote control (you will see the sleep timer on the top right corner of the display).
BUFFER: To select your preferred buffering time.
WEATHER To set the display of weather forecast on the standby mode and the tem-
:
perature units. You can select Weather Display On/Off and Location.
Temperature units are Celsius (°C) and Fehrenheit (°F).
LOCAL RADIO SETUP:
The radio will detect your local area stations automatically and under "Internet ra-
dio" you will find all the "Local Radio".
If you would like to change the Local area stations to other countries, you can
choose "Manual setup" to make the change.
PLAYBACK SETUP: To set the playback mode as Off, Repeat one / all and Shuffle.
DLNA SETUP: When the radio is connected by other DLNA devices, the default
name is "AirMusic". You can change it as you desire.
Please note: The DLNA feature is compatible and works with corresponding
third party Android APPs. Apple devices are not supported.
EQUALIZER: Equalizer function (for headphones listening only).
RESUME WHEN POWER ON: To set to ON or OFF of " Resume When Power On".
SOFTWARE UPDATE: Upgrade information will pop up on the display when there
is upgrade available on the server.
RESET TO DEFAULT: To set all the settings back to default settings.
Please note: all the Station presets, Settings and configuration will be
lost after you have performed the "Factory Reset".