Bluetooth Operation - Roadstar I-RX16BT Manual De Instrucciones

BLUETOOTH OPERATION

1. Switch the mode to Bluetooth on the Radio with left / right cursors (14/15).
2. Connect your Bluetooth portable device to the ID Bluetooth tagged "I-RX16BT" ;
3. You can now transfer the music to the "I-RX16BT"
Note: Music control (play, pause, etc) must be done from your ext. device.
VOLUME CONTROL (FOR HEADPHONES ONLY)
To adjust the volume for the external powered speaker, please use the volume control
on the powered speaker unit.
The buttons on the remote control (19/20) are to adjust the volume for earphone only.
DLNA
The Internet radio can play music stream from DLNA compatible device, provided that
the Internet radio and other DLNA devices are under the same Wi-Fi network.
The radio will appear as "AirMusic" when you try to search it on other devices. If you
want to change other name from AirMusic, go to Configuration and DLNA setup to
make the change.
MEDIA CENTER
UPNP (UNIVERSAL PLUG AND PLAY)
You can stream music from the Networked device which supports UPnP function to
the radio to play.
For instance, most of the latest computer supports UPnP, and you can stream music
from Windows Media Player application on the computer and listen on your radio.
Remark: Please make sure your computer is on the same Wi-Fi network as the
radio.
The latest Windows Media Player may be downloaded from Microsoft's website
and install by following the instructions detailed in its installation wizard.
Once installed, Windows Media Player will create a library from all the media files
available to it on your PC.
WINDOWS XP / WINDOWS MEDIA 11
1. To add new media files to the library, select' File > Add to Library...>
Advanced Options', Click 'Add' and choose the files you wish to add
and click' OK'.
2. Now you need to connect your Internet radio to Windows Media Player
11 and configure it to allow the radio to access your media library. In or-
der to this, you will need to do the following:

On the radio, go to the main menu and select <Media Centre>
<UPnP>.
 It will scan for all available UPnP servers. Note, this may take a
few seconds for the radio to complete its scan and before the
scan has completed, the radio will display '[Empty]'. The radio
will continue to display '[Empty]' if no UPnP servers and found.

After a successful scan. Select your UPnP server, by rotating
the dial if there is more than one UPnP server, and then press
English
.
4