Before You Start - Roadstar I-RX16BT Manual De Instrucciones

BEFORE YOU START

Please ensure the following is ready:
 You have a broadband internet connection;

A wireless (Wi-Fi) broadband router is connected to the internet. The radio sup-
ports Wireless B, G and N connection (Wireless N router can also be used with
the setting on B or G);

You know the Wired Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA)
data encryption code / password. You need to key in the correct code when the
radio is connected to the wireless router for network connection.
know the code/password, please contact the person /technician who set up the
router/network for you.
PRECAUTIONS
 The radio should not be used in a high temperature / high humidity en-
vironment over prolonged periods of time as this may damage the unit.
 Keep the radio away from liquids as it may get damaged. Please switch off
the radio immediately if water or liquids is spilled into the radio. Consult
with the shop you bought this radio for any question.

Avoid using or storing the unit in dusty or sandy environment
 Do not open and repair the radio by yourself.

Use only the AC / DC Adaptor supplied with the radio. Connecting a power
supply with a different rating will cause permanent damage to the radio and
may be hazardous.

Clean only with dry cloth.
SWITCHING ON THE RADIO (FIRST SETTING)
1. Plug the connector pin of the AC / DC adaptor into the DC jack of the unit (5).
2. Connect the other end of the adaptor to the wall socket.
Caution: Use only the adaptor supplied. Connecting an adaptor with differ
ent rating will cause permanent damage to the radio and may be hazardous.
3. Connect your external powered speaker to Audio-Out jack on the radio (3).
4. Switch the radio on using the Power on / off switch (6).
The display will light up and show "WELCOME".
5. Select the language with up/down cursors (12/13).
The radio will ask if you want to "Check Network" when power on.
6. Radio will ask if you want to "Configure Network"
If you chose to configure network now, please follow next steps, otherwise you
can configure it later.
7. The radio will check for networks.
8. Select your network with up/down cursors (12/13).
9. Insert the password:

Press repeatedly letters and numbers (9) or up/down cursors (12/13) to en-
ter a character.
 Move to next or previous character with left/right cursors (14/15).

Confirm with "OK" (16).
English
If you do not
2