Faults - UNITED OFFICE UAV 190 A1 Instrucciones De Uso

Faults

If the paper jams:
This means that you have attempted to feed too much paper into the appliance
(max. 6 sheets 80 g/m
● Move the switch
The appliance now goes into reverse and the material that is being shredded
is ejected.
● Pull the paper out of the appliance and then set the switch
● The appliance is now ready for use.
If the appliance suddenly stops working:
This means that the appliance is overheated and the automatic safety cut-out has
activated itself.
► Remove the power plug from the wall socket to avoid unintended starting of
the appliance
● Place the switch
● Allow the appliance to cool down.
● Put the mains plug back into the socket.
● Switch the appliance on by moving the switch
If the appliance cannot be switched on:
● Check that the plug is correctly connected to a wall socket.
● Try a different wall socket.
● The appliance is possibly defective. Have the appliance checked by qualified
specialists.
● The appliance has overheated and triggered the automatic safety cut-out.
Proceed as follows:
► Remove the power plug from the wall socket to avoid unintended starting of
the appliance
UAV 190 A1
2 paper).
into the "REV" position if the paper causes a blockage.
WARNING – RISK OF INJURY!
in the "OFF" position.
WARNING – RISK OF INJURY!
to "AUTO".
into the "AUTO" position.
GB │ MT
│
37 ■