Textron GREENLEE CMI-2000 Manual De Instrucciones página 8

Find Quality Products Online at:
Using the Features (cont'd)
• Range and Function Lock: When a measurement is being displayed by the meter, press the RANGE or
SELECT button momentarily to lock the range or function, respectively. If the RANGE button is pressed,
the icon is no longer present on the LCD. To exit the range lock feature, press and hold the
RANGE button for 1 second. The
pressed. Press the SELECT button momentarily to toggle between the different AutoCheck™ functions.
To exit this feature, press the SELECT button until "LoZAuto" is present on the LCD.
• Meter-to-Computer Interface (optional): This allows the user the ability to connect the meter to a
computer for data capture and real-time monitoring of the meter's output. The connection is made via
RS-232 or USB. Press and hold the HOLD button while turning the rotary switch to the ON position to
activate the logging function.
Using the Test Leads
Electric shock hazard:
The test leads supplied with this product comply with safety standards that limit the exposed length of
the probe tip to 4 mm for measurement categories III and IV. These test leads include a cap that must be
in place when used in measurement category III or IV applications.
Failure to observe this warning could result in severe injury or death.
Cap must be in place for measurement category III or IV applications.
Cap can be removed for measurement category I or II applications.
8
GlobalTestSupply
www.
icon will be present on the LCD when the button is no longer
.com
sales@GlobalTestSupply.com