Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5.4. Disposal
It is compulsory to subject electric tools,
accessories and packaging to a recovery
process that respect the environment.
For EU countries only:
Do not throw away electric tools!
In accordance with European Directive 2002/96/EC on
unserviceable electric and electronic apparatus, after its
transposition into national law, they must be collected
separately to subject them to ecologic recycling.
The right to amendment is reserved.
6. Legal Regulations
6.1. Technical features
The values given are valid for nominal voltages [U]
230/240 V ~ 50/60 Hz - 110/120 V ~ 60Hz. For lower
voltage and models for specific countries, these values
can vary. Please observe the article number on the type
plate of your machine. The trade names of the individual
machines may vary.
We reserve the right to change related to
technical advance.
P
= Rated input power
1
n
= Nº of revolutions without load
D
= Maximum disk diameter
max
M
= Spindle thread
m
= Mass
Typical noise levels in evaluation A:
a
= Acceleration typically evaluated in the
hw
hand/arm
L
= Acoustic pressure level
A
P
L
= Acoustic power level
WA
The noise level when working can exceed 85 dB (A).
Wear helmets hearing protection!
Measured values ? ? e stablished in accordance with EN
60745.
The technical specifications set forth herein are understood
within certain tolerances (In accordance with the present
arrangements).
ENGLISH
20
6.2 EC Declaration of conformity
The undersigned: STAYER IBERICA, S.A.
With address at:
Calle Sierra de Cazorla, 7
Área Empresarial Andalucía - Sector 1
28320 PINTO (MADRID)
Tel.: +34 902 91 86 81 / Fax: +34 91 691 91 72
CERTIFIES
That the machine:
Type:
Amoladora
Models:
FH 230
We declare under our sole responsibility that this product
is in conformity with the following standards or
standardized documents:
UNE EN 60745-2-11, UNE EN 60745-2-3, according to
EU Regulations 2006/42/CE, 2004/108/CE.
20
Ramiro de la Fuente
Director General
Publicidad
Capítulos
Tabla de contenido
