PARTS NEEDED
•
UL Listed Strain Relief
•
UL Listed Wire Connectors
Check local codes. Check existing electrical supply. See the appropriate "Electrical
Requirements" section. It is recommended that all electrical connections be made
by a licensed, qualified electrical installer.
LOCATION REQUIREMENTS
IMPORTANT:
Observe all governing codes and ordinances. When installing
cooktop, use minimum dimensions given.
•
To eliminate the risk of burns or fire by reaching over heated surface units,
cabinet storage space located above the surface units should be avoided. If
cabinet storage is to be provided, the risk can be reduced by installing a range
hood or microwave hood combination that projects horizontally a minimum of 5"
(12.7 cm) beyond the bottom of the cabinets.
•
The cooktop must be a specified cooktop that is approved to be installed either
alone or over an undercounter built-in oven.
•
Ovens approved for this type of installation will have an approval label located on
the top of the oven. If you do not find this label, contact your dealer to confirm
that your oven is approved. Refer to oven manufacturer's Installation
Instructions for approval for built-in, undercounter use and required cutout
dimensions.
•
The cooktop must be installed in a level countertop.
•
The cooktop should be installed away from strong draft areas, such as windows,
doors, fans or strong heating vents. The cooktop should be located for
convenient use in the kitchen.
•
Use the countertop opening dimensions that are given with these Installation
Instructions. Given dimensions are minimum clearances and provide 0" (0 cm)
clearance.
•
Grounded electrical supply is required. See "Electrical Requirements" section.
IMPORTANT:
To avoid damage, check with your builder or cabinet supplier to
make sure that the materials used will not discolor, delaminate or sustain other
damage.
PRODUCT DIMENSIONS
21¼"
(54 cm)
2¾"
(7.0 cm)
(61 cm)
22½"
(57.15 cm)
3
24"
19½"
(49.5 cm)
3½"
(8.9 cm)