HQ-Power VDPL5X5RGB Manual Del Usuario página 4

Protect this device from shocks and abuse. Avoid brute force when operating the device.
 Familiarise yourself with the functions of the device before actually using it. Do not allow operation by
unqualified people. Any damage that may occur will most probably be due to unprofessional use of the
device.
 All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to
the device is not covered by the warranty.
 Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electroshocks,
lamp explosion, crash, etc. Using the device in an unauthorised way will void the warranty.
 Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the
dealer will not accept responsibility for any ensuing defects or problems.
 Mechanical wear and LEDs are not covered by warranty.
 A qualified technician should install and service this device.
 Do not switch the device on immediately after it has been exposed to changes in temperature. Protect the
device against damage by leaving it switched off until it has reached room temperature.
 This device is designed for professional use on stage, in discos, theatres, etc. The device should only be
used indoors with an alternating current of 100 to 240 VAC, 50/60 Hz.
 This device is designed for professional use on stage, in discos, theatres, etc. The VDPL5X5RGB should only
be used indoors.
 Lighting effects are not designed for permanent operation: regular operation breaks will prolong their lives.
 There may be some smoke or a particular smell when the device is activated for the first time. This is
normal and any smoke or smell will gradually disappear.
 Use the original packaging if the device is to be transported.
 Keep this manual for future reference.
4. Features
The TRIXUS is a LED matrix consisting of 25 x 10 W RGB COB LEDs, designed to revolutionize the concept of
pixel control applied to lighting by LED sources. Each LED is independently controllable and allows the stage
designer to create advanced eye candy effects, pixel mapping animations, video reproductions and blinder
effects.
 different DMX-selectable configurations
1-channel mode: pre-programmed effects
o
3-channel mode: RGB
o
5-channel mode: function, pattern, colour, dimmer, shutter
o
25-channel mode: 25 x colour (for each pixel)
o
75-channel mode: 25 x RGB (for each pixel)
o
 sound activation via internal microphone with adjustable sensitivity
 static colour selection
 master/slave mode for synchronized operation of multiple units linked in a chain
 flicker-free operation (400 Hz)
5. Overview
Refer to the illustrations on page 2 of this manual.
safety cable attachment
1
handle
2
cooling fan
3
display with menu buttons
4
microphone
5
6. Installation
Choose a suitable mounting spot. Connect the power cord to the mains. Disconnect after use.
V. 01 – 21/08/2014
VDPL5X5RGB
3-pin XLR input and output
6
5-pin XLR input and output
7
powerCON input and output
8
fuse
9
4 ©Velleman nv