Before Using The Appliance The First Time; Operation - Unold 18320 Instrucciones De Uso

BEFORE USING THE APPLIANCE THE FIRST TIME

1. Remove all packaging materials and any transport safety devices. Keep chil-
dren away from the packaging materials due to the danger of suffocation.
2. Clean all parts with a damp cloth, as described in the chapter "Cleaning
and care".
3. Check to make sure that the appliance is stable.
4. Connect the base via the power cord to the power supply (220–240 V~,
50/60 Hz).
5. Remove the kettle from the base.
6. Open the lid by gripping into the lid and pulling it upwards.
7. Add clear, cold water to the "Max" marking.
8. Close the lid by pressing lightly.
9. Place the kettle level on the base.
10. Switch on the kettle by pressing the ON/OFF switch downwards into the „I"-
position. The kettle cannot be switched on if it is not properly seated on the
base.
11. When the water boils, the appliance automatically shuts off.
12. For hygienic reasons, please discard the water from the first boiling.

OPERATION

1. Remove the kettle from the base.
2. Open the lid by gripping into the lid and pulling it upwards.
3. Fill the kettle with at least 0.5 liters of water. Do not fill the kettle with more
than 1.0 liters of water ("Max" marking).
4. Close the lid by pressing lightly.
5. Place the kettle level on the base.
6. Switch on the kettle by pressing the ON/OFF switch downwards into the „I"-
position. The kettle cannot be switched on if it is not properly seated on the
base.
7. When the water boils, the appliance automatically shuts off.
8. Whenever you take the kettle off the base, the appliance is automatically
switched off, even if the water is not yet boiling.
9. Of course you may also push the switch into the „O"-position to interrupt
heating.
10. If you want to boil more water, please allow the appliance to cool off for a
few minutes.
16
Copyright UNOLD AG | www.unold.de