Before Using The Appliance The First Time; Operation - Unold 18020 Instrucciones De Uso

BEFORE USING THE APPLIANCE THE FIRST TIME

1. Remove all packaging materials and any transport safety devices. Keep
packaging materials away from children - danger of suffocation!
2. Clean all parts with a damp cloth, as described in the chapter "Cleaning
and care".
3. Check to make sure that the appliance is stable.
4. Connect the base via the power cord to the power supply (220–240 V~,
50/60 Hz).
5. Remove the kettle from the base.
kettle cannot be switched on if it is not properly seated on the base.
11. When the water boils, the appliance automatically shuts off.
12. For hygienic reasons, please discard the water from the first boiling.

OPERATION

1. Remove the kettle from the base.
2. Press the opening button on top of the handle. The lid is released and can
be open.
3. Fill the kettle with water (minimum 0.5 litres, mark MIN, maximum
1.0 litres, mark MAX).
4. CAUTION!
If the kettle is overfilled, boiling water may be ejected!
5. Close the lid until it clicks into place. The locking prevents accidental open-
ing.
6. Place the kettle level on the base in order to establish the contact with the
power connection.
Stand 18.2.2020
Copyright UNOLD AG | www.unold.de
6. Press the opening button on top of the handle.
The lid is released and can be open.
7. Add clear, cold water to the "Max" marking.
8. Close the lid by pressing lightly.
9. Place the kettle level on the base.
10. Switch on the kettle by pressing the ON/OFF
switch downwards into the „I"-position. The
DE
EN
FR
NL
IT
ES
PL
19 von 60