Remote Control Unit; Operation - Unold Skyline Instrucciones De Uso

1 Speed
For adjusting the three different speed levels
2 Timer
For selecting the time after which the appliance switches off, adjustable
between 1 and 8 hours
3 ON/OFF
For switching the appliance on and off
4 Mode
For selecting the desired mode. Standard mode, Near-Natural Mode or
Sleep Mode.
5 Oscillation
For switching the Swing Function/Oscillation On and Off
6 Anions
For switching the ion function On and Off

REMOTE CONTROL UNIT

1. Carefully pull the cover of the battery compartment out of the remote control
unit.
ensure that you use a CR2025 button cell battery.
4. Carefully slide the cover back into the remote control unit.
5. If you adjust the appliance with the remote control unit, ensure that you
always hold it in the direction of the fan while you are making the settings.
6. The designations on the remote control unit are identical to the designations
of the buttons on the appliance.
7. To avoid damage, never allow the remote control unit to fall from a signifi-
cant height.

OPERATION

1. Ensure that the appliance is standing on a suitable, level substrate, and has
been set up so that it is safe and stable.
2. Plug the power cord into an electrical outlet.
3. A short signal tone will sound, and the current temperature will be shown in
the display. The „ON/OFF" indicator light is illuminated.
Stand 26.2.2020
Copyright UNOLD AG | www.unold.de
2. Insert the battery into the intended
holder.
3. If you want to insert a different battery,
DE
EN
FR
NL
IT
ES
PL
21 von 68