CONTROL PANEL
OPERATION
1.
Ensure that the appliance is standing on a suitable, level substrate, and has
been set up so that it is safe and stable in the vicinity of an electrical outlet.
2.
Do not set up the appliance in bathrooms or other wet rooms!
3.
Plug the power plug of the appliance into the electrical outlet (220–240V~
50Hz).
4.
If you want to set up the appliance at a different location, first switch off the
appliance and then unplug the power plug from the electrical outlet.
5.
Do not insert any objects into the appliance.
Adjusting the tilt angle
6.
You can tilt the motor housing horizontally to a certain extent. To do this,
press the motor housing into the desired tilt angle. To prevent appliance
damage, do not use excessive force.
Stand 15.6.2020
Copyright UNOLD AG | www.unold.de
1
1
2
3
2
3
Switches – ON/OFF/Timer
For setting the desired runtime
between 20 and 120 minutes.
Buttons – Speed
Select between 3 levels; button „0"
switches off the appliance.
ON/OFF – spray mist
Switches the spray mist on and off
DE
EN
FR
NL
IT
ES
PL
27 von 96